Top: Shure MXA910W-A microphone array ceiling tile (image courtesy of shure.com)
Bottom: AVerCam VC520 Pro (image courtesy of communication.aver.com) 

  • Classroom Locations
    • 50P1226
    • 60P1002
    • AH B06
    • AH B30
    • AK219
    • AK232
    • AK233
    • FL311
    • FL320
    • GH227
    • HL230
    • IS105
    • IS203 *when combined with 205, use the 205 podium for Zoom
    • IS205 *when combined with 203, use the 205 podium for Zoom
    • KH116
    • OH109
    • OH126
    • OH218
    • OH223
    • SL104
    • SL105
    • SL123
    • SL305
    • SL402
    • SL406
    • SL407
    • SL411
    • UH400
    • UH405
    • UH420
    • UH500
    • UH520
    • WB229

  • Components

    Shure Microphone Array: Microphones to capture in-room participant audio have been installed in the ceiling.

    Photo of FL320. Pictured top-center is the Shure MXA910W-A microphone array.

    AVerCam520 Pro: Advanced video conference camera that points at the classroom seating to provide remote participants with a view of the in-room participants.

    Photo of FL320. Pictured just to the left of the projector screen is the AVerCam520 Pro.

  • Configuring the System for use with Zoom
    1. Connect to your meeting using the Zoom desktop application.
    2. From Zoom, navigate to Video/Start Video > Video Settings and be sure AVer CAM520 Pro camera option is selected.
    3. Navigate to Audio Settings (via the microphone icon) and make sure the Speaker is set to ExtronScalerD (NVIDIA High Definition Audio) as shown.  
    4. Still in Audio Settings, be sure the Echo Cancelling Speakerphone (DMP Plus USB#1) Microphone option is selected as shown.  
    AVer CAM520 Pro should be selected as the video source in Zoom.
    ExtronScalerD (NVIDIA High Definition Audio) should be selected as the speaker source and Echo Cancelling Speakerphone (DMP Plus USB#1) should be selected as the microphone source in Zoom. 

  • Adjusting the Camera View
    1. Make sure you have the video shared in Zoom.
    2. From the AV control panel, select Camera Control. (In Unity Hall Classrooms, select Camera.) This button can be found on the left-hand side of the control panel.
    3. Use the Pan arrows to move the camera up, down, left, or right. Use the Zoom Control + and - buttons to zoom the view in or out. 
    The button for the Zoom camera controls for non-Unity Hall classrooms can be found on the main screen of the AV control panel on the left.
    In Unity Hall Classrooms, the Camera controls are also found on the left.
    Use the Pan/Tilt arrows to adjust the view of the camera and the Zoom Control buttons to zoom the view in or out.